Finite Element Analysis For Vertical Mixer-Chopper Auger Of Mixer Feeder With A Capacity Of 1.5 M3

Salih Şeflek, Haydar Hacıseferoğulları

Abstract


Optimizations in manufacture of agricultural machinery not only provide significant material savings, but also provide significant savings in energy requirements of drive units of these machines. In this study, chopper and mixer auger of self-propelled mixer feeder and spreader with a vertical auger and 1.5 m3 capacity was optimized by using finite element method (FEM) of analysis. Auger design was performed with Solidworks software and stress analyses were performed with Static Analysis Module of the software. For auger tube analyses, St37 was selected as the material. Based on stress analysis results, auger tube dimensions were identified as 219 x 6 mm. The greatest stress (91.5 MPa) value was observed at bolted connections of the auger tube. Based on operational parameters for auger tube dimensions, safety coefficient was identified as 2.57.

Keywords


Feed mixing Mixer wagon, Vertical type mixing

Full Text:

PDF

References


TÜİK (2017a). Türkiye İstatisitk Kurumu Basın Odası Haberleri (www.tüik.gov.tr) Sayı:10/2017.

TÜİK (2017b). İstatistiksel veriler (www.tüik.gov.tr) [Erişim tarihi: 10.12.2017].

İleri M (2018). Tarmakbir Tarımsal Mekanizasyon Sektör Raporu (www. tarmakbir. org) [Erişim tarihi: 31.01.2018], Ankara.

Vegricht J, Miláček P, Ambrož P and Machálek A (2007). Parametric analysis of the properties of selected mixing feeding wagons, Res. Agric. Eng, 53 (3): 85-93.

Yalçın H, Evrenosoğlu M, Bilgin H (2007). Ege Bölgesinde Kullanılan Bazı Yem Karıştırma ve Dağıtma Arabalarının Özellikleri, Tarımsal Mekanizasyon 24. Ulusal Kongresi, Kahramanmaraş, 354-360.

Akdeniz M (2015). Küçük kapasiteli elektrikli kendi yürür yem karma ve dağıtma makinesinin bilgisayar destekli tasarımı, Adnan Menderes Üniversitesi, Fen Bilimleri Enstitüsü, Tarım Makinaları Anabilim Dalı (Basılmamış), Aydın.

Taşer S (2015). Planet dişli mekanizmaları ve yem karma makinesi R6 planet dişli setinde karşılaşılan hasarların incelenmesi. Balıkesir Üniversitesi Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı (Basılmamış), Balıkesir.




DOI: https://doi.org/10.15316/SJAFS.2018.66

Refbacks

  • There are currently no refbacks.


Creative Commons Lisansı
Bu eser Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.